[Bacterial Community Structure of Typical Lake Sediments in Yinchuan City and Its Response to Heavy Metals].

Lake wetlands are extremely important and special ecosystems, which are important for regional water resource storage, environmental protection, and biodiversity maintenance. Sediment bacteria are an important component of lake ecosystems and are a major driver of biogeochemical cycling in lakes. In order to investigate the community structure of bacteria in typical lake sediments in Yinchuan City and their influencing factors, three typical lakes in Yinchuan City (Yuehai Lake, Mingcui Lake, and Xiniu Lake) were selected for the study and surface sediments were collected in January, April, July, and October 2021. The composition of the sediment bacterial community was examined using 16S rDNA high-throughput sequencing technology, and the response relationships between them and heavy metals were explored. The results showed that the ecological hazard coefficient for heavy metals in the sediments of three typical lakes in Yinchuan City was far less than 40, and the ecological hazard index was far less than 150, all of which indicated a minor ecological hazard. There were no significant differences in bacterial community diversity among the three lakes, but there were significant variations in diversity among the lakes in different seasons and significant differences in community composition. The dominant phyla (top three in terms of relative abundance) in Yuehai Lake, Mingcui Lake, and Xiniu Lake were Proteobacteria, Bacteroidetes, and Chloroflexi. The dominant lower orders were Gammaproteobacteria, Alphaproteobacteria, and Deltaproteobacteria. The main divergent species that occurred at the phylum level in typical lakes in Yinchuan were Proteobacteria, Bacteroidetes, Euryarchaeota, Firmicutes, Actinobacteria, and Acidobacteria. The sediment bacterial community structure of Yuehai Lake was significantly correlated with Cu, Fe, Mn, Zn, As, and Pb; the sediment bacterial community structure of Lake Mingcui was significantly correlated with Fe, Pb, and Cr; and the sediment bacterial community structure of Xiniu Lake was not significantly correlated with heavy metals. The types and contents of sediment heavy metals had a significant effect on the bacterial community structure of sediments in Yinchuan Yuehai Lake and Mingcui Lake and were important environmental factors that caused changes in the bacterial community structure of lake sediments.

[Characterization of Microplastic Surface Bacterial Community Structure and Prediction of Ecological Risk in Poyang Lake, China].

In recent years, the environmental pollution of microplastics in Poyang Lake has received increasing attention. Baisha Lake of Poyang Lake was selected as the study area, and samples of water and sediments of Baisha Lake and the microplastics therein were collected, and the polymer types of microplastics were identified as polyethylene (PE), polyester (PET), polypropylene (PP), and polystyrene (PS) using Fourier infrared spectroscopy. We also analyzed the structural composition of bacterial communities in water, in sediments, and on microplastic surfaces using 16S high-throughput sequencing. The species richness and diversity of bacteria on the microplastic surfaces were lower than those in the surrounding water and sediments. The results of NMDS analysis showed that the bacterial community structures on the microplastic surfaces differed greatly from those in the surrounding sediments and water. The bacterial community composition in water and sediment differed from that on the microplastic surfaces, and the dominant bacterial phyla on the microplastic surfaces were Proteobacteria and Bacteroidota, and their relative abundance on the microplastic surfaces was higher than that in sediment. The relative abundance of Proteobacteria was higher than that in water. The relative abundances of Bacteroidota and Actinobacteriota were significantly lower than that of water. Massilia and Pseudomonas were the dominant genera on the microplastic surfaces, and their relative abundances were significantly higher than those in the surrounding water and sediments. BugBase phenotype prediction revealed that the relative abundance of contains mobile elements, biofilm formation, potential pathogenicity, and stress tolerance phenotypes of microplastic bacterial communities were significantly higher than those of the surrounding water and sediments. The results revealed that microplastics may have contributed to the spread of harmful bacteria, including pathogenic bacteria, and increased the potential pathogenicity of bacterial communities. Additionally, microplastic surface bacterial communities had higher phenotypes of mobile gene element content. Revealing the potential harm of microplastic pollution to wetland ecology at the micro level may provide a scientific reference for maintaining the ecological stability of wetlands.

Modeling the sediment yield and estimating the best management practices in the Seybouse basin, Northeastern Algeria.

Identifying vulnerable areas to erosion within the watershed and implementing best management practices (BMPs) are crucial steps in mitigating watershed degradation by minimizing sediment yields. The present study evaluates and identifies the BMPs in the Seybouse basin, northeastern Algeria, using the Soil and Water Assessment Tool (SWAT) model. After successful calibration and validation, the model demonstrated a satisfactory ability to simulate monthly discharge and sediment. Then, the calibrated model was employed to evaluate the efficacy of diverse management practices in sediment control. In the SWAT, three soil and conservation practices, as well as vegetated filter strips (VFSs), grade stabilization structures (GSSs), and terracing were evaluated. The average annual sediment yield in the Seybouse watershed is determined to be 14.43 t/ha year, constituting 71% of the total soil loss. VFS demonstrated a sediment reduction of 37.30%, GSS 20.40%, and terracing 42.30%. Among these strategies, terracing results in the greatest reduction, followed by VFS. The results of this study area can be useful for informed decision-making regarding optimal watershed management strategies.

Functional diversity of macrozoobenthos under adverse oxygen conditions in the southern Baltic Sea.

Oxygen deficiency is a major problem in the Baltic Sea. To study the impact of hypoxia on the functional diversity of benthic fauna and the possibility of macrozoobenthos recovery, data were analyzed in a gradient of oxygen conditions in the Gdansk Basin. The research conducted on the basis of biological traits analysis enabled us to analyze the number, type and spatial distribution of biological traits-a proxy for functions performed by macrozoobenthos. A significant depletion of macrofauna was already observed under conditions of reduced oxygen above the bottom, both in terms of functional diversity and biomass. Although taxa observed in hypoxia (DO < 2 mL L-1) perform a number of functions, the remaining species do not form complex structures in the sediments or cause deep bioturbation and bioirrigation. Moreover, their extremely low biomass plays an irrelevant role in benthic-pelagic coupling. Thus, benthic fauna under hypoxia is not an element that ensures the functioning of the ecosystem. We assess that traits important for species dispersal and the presence of taxa resistant to short-term hypoxia in the oxic zone above the halocline provide a "backup" for ecosystem functioning under altered diverse oxygen conditions below the halocline after cessation of hypoxia in the southern Baltic Sea.

Temporal and spatial distribution of polycyclic aromatic hydrocarbons (PAHs) in the Danube River in Hungary.

The Danube is a significant transboundary river on a global scale, with several tributaries. The effluents from industrial operations and wastewater treatment plants have an impact on the river's aquatic ecosystem. These discharges provide a significant threat to aquatic life by deteriorating the quality of water and sediment. Hence, a total of 16 Polycyclic Aromatic Hydrocarbons (PAHs) compounds were analyzed at six locations along the river, covering a period of 12 months. The objective was to explore the temporal and spatial fluctuations of these chemicals in both water and sediment. The study revealed a significant fluctuation in the concentration of PAHs in water throughout the year, with levels ranging from 224.8 ng/L during the summer to 365.8 ng/L during the winter. Similarly, the concentration of PAHs in sediment samples varied from 316.7 ng/g in dry weight during the summer to 422.9 ng/g in dry weight during the winter. According to the Europe Drinking Water Directive, the levels of PAHs exceeded the permitted limit of 100 ng/L, resulting in a 124.8% rise in summer and a 265.8% increase in winter. The results suggest that the potential human-caused sources of PAHs were mostly derived from pyrolytic and pyrogenic processes, with pyrogenic sources being more dominant. Assessment of sediment quality standards (SQGs) showed that the levels of PAHs in sediments were below the Effect Range Low (ERL), except for acenaphthylene (Acy) and fluorene (Fl) concentrations. This suggests that there could be occasional biological consequences. The cumulative Individual Lifetime Cancer Risk (ILCR) exceeds 1/104 for both adults and children in all sites.

Cadaverine and putrescine exposure influence carbon and nitrogen cycling genes in water and sediment of the Yellow River.

The response patterns of microbial functional genes involved in biogeochemical cycles to cadaver decay is a central topic of recent environmental sciences. However, the response mechanisms and pathways of the functional genes associated with the carbon (C) and nitrogen (N) cycling to cadaveric substances such as cadaverine and putrescine remain unclear. This study explored the variation of functional genes associated with C fixation, C degradation and N cycling and their influencing factors under cadaverine, putrescine and mixed treatments. Our results showed only putrescine significantly increased the alpha diversity of C fixation genes, while reducing the alpha diversity of N cycling genes in sediment. For the C cycling, the mixed treatment significantly decreased the total abundance of reductive acetyl-CoA pathway genes (i.e., acsB and acsE) and lig gene linked to lignin degradation in water, while only significantly increasing the hydroxypropionate-hydroxybutylate cycle (i.e., accA) gene abundance in sediment. For the N cycling, mixed treatment significantly decreased the abundance of the nitrification (i.e., amoB), denitrification (i.e., nirS3) genes in water and the assimilation pathway gene (i.e., gdhA) in sediment. Environmental factors (i.e., total carbon and total nitrogen) were all negatively associated with the genes of C and N cycling. Therefore, cadaverine and putrescine exposure may inhibit the pathway in C fixation and N cycling, while promoting C degradation. These findings can offer some new insight for the management of amine pollution caused by animal cadavers.

Comprehensive molecular-isotopic characterization of archaeal lipids in the Black Sea water column and underlying sediments.

The Black Sea is a permanently anoxic, marine basin serving as model system for the deposition of organic-rich sediments in a highly stratified ocean. In such systems, archaeal lipids are widely used as paleoceanographic and biogeochemical proxies; however, the diverse planktonic and benthic sources as well as their potentially distinct diagenetic fate may complicate their application. To track the flux of archaeal lipids and to constrain their sources and turnover, we quantitatively examined the distributions and stable carbon isotopic compositions (δ13 C) of intact polar lipids (IPLs) and core lipids (CLs) from the upper oxic water column into the underlying sediments, reaching deposits from the last glacial. The distribution of IPLs responded more sensitively to the geochemical zonation than the CLs, with the latter being governed by the deposition from the chemocline. The isotopic composition of archaeal lipids indicates CLs and IPLs in the deep anoxic water column have negligible influence on the sedimentary pool. Archaeol substitutes tetraether lipids as the most abundant IPL in the deep anoxic water column and the lacustrine methanic zone. Its elevated IPL/CL ratios and negative δ13 C values indicate active methane metabolism. Sedimentary CL- and IPL-crenarchaeol were exclusively derived from the water column, as indicated by non-variable δ13 C values that are identical to those in the chemocline and by the low BIT (branched isoprenoid tetraether index). By contrast, in situ production accounts on average for 22% of the sedimentary IPL-GDGT-0 (glycerol dibiphytanyl glycerol tetraether) based on isotopic mass balance using the fermentation product lactate as an endmember for the dissolved substrate pool. Despite the structural similarity, glycosidic crenarchaeol appears to be more recalcitrant in comparison to its non-cycloalkylated counterpart GDGT-0, as indicated by its consistently higher IPL/CL ratio in sediments. The higher TEX86 , CCaT, and GDGT-2/-3 values in glacial sediments could plausibly result from selective turnover of archaeal lipids and/or an archaeal ecology shift during the transition from the glacial lacustrine to the Holocene marine setting. Our in-depth molecular-isotopic examination of archaeal core and intact polar lipids provided new constraints on the sources and fate of archaeal lipids and their applicability in paleoceanographic and biogeochemical studies.

Microplastic-antifouling paint particle contamination alters microbial communities in surrounding marine sediment.

Paint used to coat surfaces in aquatic environments often contain biocides to prevent biofouling, and as these coatings degrade, antifouling paint particles (APPs) end up in aquatic, and especially marine, sediments. However, it is currently unclear what further influence APPs in the sediment have on biotic communities or processes. This study investigates how a variety of commercially-available APPs effect the marine microbial community by spiking different laboratory-manufactured APPs to sediment. Following exposure for 30 and 60 days, APPs caused a clear and consistent effect on the bacterial community composition as determined by 16S metabarcoding. This effect was strongest between 0 and 30 days, but continues to a lesser extent between 30 and 60 days. APPs appear to inhibit the highly diverse, but in general rarer, fraction of the community and/or select for specific community members to become more dominant. 71 antifouling-presence and 454 antifouling-absence indicator taxa were identified by indicator analysis. The difference in the level of classification in these two indicator groups was highly significant, with the antifouling-presence indicators having much higher percentage sequence identity to cultured taxa, while the antifouling-absence indicators appear to be made up of undescribed taxa, which may indicate that APPs act as a proxy for general anthropogenic influence or that APP contamination selects for taxa capable of being cultured. Given the clear and consistent effect APPs have on the surrounding sediment microbial community, further research into how APPs affect sediment functional processes and how such effects scale with concentration is recommended to better assess the wider consequences of these pollutants for marine biogeochemical cycles in the future. SYNOPSIS: Microplastic-paint particles are commonly found in marine sediment but little is known about how these, especially antifouling, paint particles affect sediment microbial communities. This study demonstrates that antifouling paint particles fundamentally alter sediment microbial communities.

Distribution of acid-volatile sulfides and simultaneously extracted metals in Guanabara Bay: combination of anthropogenic, sedimentological, and geochemical processes.

Coastal sedimentary systems are affected by continental and marine metal pollutant inputs associated with different hydrodynamic characteristics and geochemical processes. These include the formation of acid-volatile sulfides (AVS) within sediments, which affects metal bioavailability and associated aquatic biota toxicity risks. Physicochemical changes in these environments in the face of extreme natural or man-made environmental influences can dramatically alter metal bioavailability and toxicity through metal binding and immobilization as insoluble sulfides. Surface sediments from Guanabara Bay, river mouths, and two mangrove areas were collected, and AVS and simultaneously extracted metals Cd, Cu, Fe, Mn, Ni, Pb, and Zn and ΣSEM were determined to assess sediment quality. A severe eutrophication history favored AVS concentrations exceeding or close to the sum-SEM concentrations, demonstrating that AVS play an important role in making trace metals unavailable for assimilation by living organisms, mitigating the risks of contamination for the local biota. This eutrophication-driven sulfide accumulation may attenuate the sediment toxicity in sites heavily polluted by metals, while some fewer eutrophic sites became more exposed to metals in excess to AVS.

Biotic and Abiotic Regulations of Carbon Fixation into Lacustrine Sediments with Different Nutrient Levels.

Lake sediments play a critical role in organic carbon (OC) conservation. However, the biogeochemical processes of the C cycle in lake ecosystems remain limitedly understood. In this study, Fe fractions and OC fractions, including total OC (TOC) and OC associated with iron oxides (TOCFeO), were measured for sediments from a eutrophic lake in China. The abundance and composition of bacterial communities encoding genes cbbL and cbbM were obtained by using high-throughput sequencing. We found that autochthonous algae with a low C/N ratio together with δ13C values predominantly contributed to the OC burial in sediments rather than terrigenous input. TOCFeO served as an important C sink deposited in the sediments. A significantly positive correlation (r = 0.92, p < 0.001) suggested the remarkable regulation of complexed FeO (Fep) on fixed TOC fractions, and the Fe redox shift triggered the loss of deposited OC. It should be noted that a significant correlation was not found between the absolute abundance of C-associating genera and TOC, as well as TOCFeO, and overlying water. Some rare genera, including Acidovora and Thiobacillus, served as keystone species and had a higher connected degree than the genera with high absolute abundance. These investigations synthetically concluded that the absolute abundance of functional genes did not dominate CO2 fixation into the sediments via photosynthesis catalyzed by the C-associating RuBisCO enzyme. That is, rare genera, together with high-abundance genera, control the C association and fixation in the sediments.

Chemical speciation and comprehensive risk assessment of metals in sediments from Nabq protectorate, the Red Sea using individual and synergistic indices.

The study evaluates metal concentrations, distributions, contamination, risk, sources, fractionation, and mobility in Nabq Protectorate sediments, revealing a metal content order of Fe, Mn, Pb, Ni, and Cd. Metals are dominated by residual fractions, with Cd (83.70 %) > Ni (82.98 %) > Pb (80.96 %) > Fe (80.31 %) > Mn (76.65 %) reflecting the natural sources of investigated metals. Mn (23.35 %) was the most abundant mobile metal, and the sediments of the protectorate had low toxicity and moderate risk according to the synergistic indices (1 ≤ mRAC<10 and ERM; 5-10). The results from the proposed individual indices showed that Mn, Fe, and Pb are the most bioavailable (BIM 0.1-0.4), Cd, Mn, Ni, Fe, and Pb are of moderate mobility (MIM 0.1-0.4), and Cd is the most available (ARIM 5-10), with Cd posing the most ecological risk. The total hazard quotient (THQ) for child was greater than one, exposure to manganese through ingestion and skin contact while swimming may endanger human health.

Environmental occurrence and assessment of organic pollutants in surface sediments of South Peninsular Malaysia.

Organic pollution continues to be an important worldwide obstacle for tackling health and environmental concerns that require ongoing and prompt response. To identify the LAB content levels as molecular indicators for sewage pollution, surface sediments had obtained from the South region of Malaysia. The origins of the LABs were identified using gas chromatography-mass spectrometry (GC-MS). ANOVA and a Pearson correlation coefficient at p < 0.05 were used in the statistical analyses of the differences between the research locations. Internal to external (I/E) ratio, homologs C13/C12, and long to short (L/S) chains are used to identify the effectiveness of wastewater treatments. According to statistical analysis, the range of LAB level at the stations was 67.4 to 188.7 ng g-1dw. A significant difference was observed between LAB homologs (p < 0.05), with a higher level of C13 in most of the stations. The computed LAB ratio (I/E), which varied from 1.6 to 2.7, revealed the released wastewater from primary and secondary sources. LAB degradation varied between 33 and 49% in the areas that were evaluated. The treatment system of wastewater requires to be further improved, and using LAB markers to track anthropogenic contamination is imperative.

[Occurrence Characteristics of Microplastics in Multi-environmental Media and Bellamya aeruginosa of Manao River].

Microplastic pollution poses threats to aquatic ecosystems and human health. In this study, in order to investigate the characteristics of microplastic occurrence in different environmental media, the abundance, particle size, shape, color, and composition types of microplastics in the water column, sediment, riparian zone soil, and the benthic snail Bellamya aeruginosa of the Manao River were analyzed using field sampling, microscopic observation, and Fourier infrared spectroscopy. The results showed that the average abundance of microplastics in the surface water of the Manao River was (5.9±0.26) n·L-1; the abundance of microplastics in the upper sediment (by dry weight) was (1.35±0.1) n·g-1, and that in the lower sediment (by dry weight) was (0.93±0.12) n·g-1. The abundance of microplastics in the near riparian zone soil (by dry weight) was (0.68±0.16) n·g-1, and that in the far riparian zone soil (by dry weight) was (0.69±0.14) n·g-1, and the abundance of microplastics in the B. aeruginosa was (2.06±0.25) n·g-1. The analysis results showed that the abundance of microplastics in the upper and lower sediments were positively correlated; the abundance of microplastics in B. aeruginosa was positively correlated with the abundance of microplastics in the upper and lower sediments, respectively; and the abundance of microplastics in the near and far riparian zone soils were also correlated. Most of the microplastics within each environmental medium and B. aeruginosa were <0.1 mm in size, mainly in the form of fibers and fragments, mainly blue and black in color, and mainly composed of polypropylene (PP) and polyethylene (PE). It was found that microplastics in riparian zone soils mainly originated from the fragmentation and decomposition of agricultural plastic films. The results of this study shed light on the accumulation of microplastics in macrobenthic organisms through the investigation of microplastics in multi-environmental media and in the B. aeruginosa, which helps us to understand the potential ecological risk of microplastics in a comprehensive manner.

Selected legacy and emerging organic contaminants in sediments of China's Yangtze - the world's third longest river: Response to anthropogenic activities.

To explore contaminant concerns as a result of anthropogenic disturbance of the river system, this study provided the first extensive investigation of the contamination profiles, possible driving factors, and ecological risks of 40 target compounds including pharmaceuticals and personal care products (PPCPs), neonicotinoid pesticides (NNIs), polybrominated diphenyl ethers (PBDEs), and polychlorinated biphenyls (PCBs) in sediments of the whole Yangtze River (the world's third longest river). Among these target compounds, PPCPs were the dominant contaminants with a total concentration (∑15PPCPs) of 2.13-14.99 ng/g, followed by ∑7PCBs (

Effects of dissolved oxygen changes in the benthic environment on phosphorus flux at the sediment-water interface in a coastal brackish lake.

In semi-enclosed coastal brackish lakes, changes in dissolved oxygen in the bottom layer due to salinity stratification can affect the flux of phosphorus (P) at the sediment-water interface, resulting in short- and long-term water quality fluctuations in the water column. In this study, the physicochemical properties of the water layers and sediments at five sites in Saemangeum Lake were analyzed in spring and autumn for four years, and phosphorus release experiments from sediments were conducted for 20 days under oxic and anoxic conditions during the same period. Sediment total phosphorus (T-P) decreased in autumn compared to spring due to mineralization of organic bound phosphorus, which was the most dominant P fraction. This may be related to the increase in the ratio of PO4-P to T-P in bottom waters in autumn, when hypoxia was frequently observed. The difference in P fluxes between oxic and anoxic conditions indicated that during autumn, as compared to spring, the release of phosphorus could have a more immediate impact on the water column during the formation of hypoxia/anoxia. The main factors influencing changes in P fluxes from sediments were identified through redundancy analysis. Additionally, based on the results of multiple regression analysis, sediment TOC, sediment non-apatite phosphorus, porewater pH, and porewater PO4-P were determined to be the most significant factors affecting P fluxes from sediments, depending on the season or redox conditions. Recently, the increased influx of seawater into Saemangeum Lake has been shown to contribute to water quality improvements in the water column due to a strong dilution effect. However, the sediment environment has shifted towards a more reduced state, leading to increased P release under anoxic conditions. Therefore, for future water quality management within the lake, it is necessary to consistently address the recurring hypoxia and continuously monitor phosphorus dynamics.

Integrated assessment of the natural purification capacity of tidal flat for persistent toxic substances and heavy metals in contaminated sediments.

Natural purification of pollutants is highly recognized as regulating ecosystem services; however, the purification capacity of tidal flats remains largely unknown and/or unquantified. A 60-day mesocosm transplant experiment was conducted in situ to assess the purification capacity of natural tidal flats. We adopted the advanced sediment quality triad approach, monitoring 10 endpoints, including chemical reduction, toxicity changes, and community recoveries. The results indicated that contaminated sediments rapidly recovered over time, particularly > 50% within a day, then slowly recovered up to âˆ¼ 70% in a given period (60 days). A significant early reduction of parent pollutants was evidenced across all treatments, primarily due to active bacterial decomposition. Notably, the presence of benthic fauna and vegetated halophytes in the treatments significantly enhanced the purification of pollutants in both efficacy and efficiency. A forecast linear modeling further suggested additive effects of biota on the natural purification of tidal flats, reducing a full recovery time from 500 to 300 days. Overall, the triad approach with machine learning practices successfully demonstrated quantitative insight into the integrated assessment of natural purification.

Microplastics strengthen nitrogen retention by intensifying nitrogen limitation in mangrove ecosystem sediments.

Mangrove wetlands are hotspots of the global nitrogen (N) cycle and important sinks of microplastics (MPs) due to their ecotone location between terrestrial and marine ecosystems. However, the effects of MPs on N cycle processes in mangrove ecosystems are still poorly understood. Thus, the present study assessed the impacts by adding MPs to mangrove sediments in a microcosm incubation experiment. The results showed that MPs increased dissolved organic carbon and nitrate but reduced ammonium contents in the sediments. MPs increased C:N stoichiometric and N:C-acquiring enzymatic ratios, indicating an intensified N limitation in mangrove sediments following exposure of MPs. MPs decreased microbial community diversity and shifted sediment microbial communities from r- to K-strategists, consistent with the intensified N limitation. In response, dissimilatory nitrate reduction to ammonium (DNRA) rates increased while nitrous oxide (N2O) production reduced suggesting more efficient N utilization in MPs treatments. The MPs with heteroatoms such as PLA- and PVC-MPs, increased DNRA rates by 67.5-78.7%, exhibiting a stronger impact than PE-MPs. The variation partitioning analysis revealed that the variances of DNRA rates and N2O production could be attributed to synergistic effects of physicochemical properties, nutrient limitation, and microbial community in mangrove sediments. Overall, this study provides pertinent insights into the impacts of MPs as a new carbon source on nutrient limitation and N turnover in mangrove ecosystems.

Nitrogen loss in coastal sediments driven by anaerobic ammonium oxidation coupled to microbial reduction of Mn(IV)-oxide.

Coastal sediments play a central role in regulating the amount of land-derived reactive nitrogen (Nr) entering the ocean, and their importance becomes crucial in vulnerable ecosystems threatened by anthropogenic activities. Sedimentary denitrification has been identified as the main sink of Nr in marine environments, while anaerobic ammonium oxidation with nitrite (anammox) has also been pointed out as a key player in controlling the nitrogen pool in these locations. Collected evidence in the present work indicates that the microbial biota in coastal sediments from Baja California (northwestern Mexico) has the potential to drive anaerobic ammonium oxidation linked to Mn(IV) reduction (manganammox). Unamended sediment showed ammonification, but addition of vernadite (δMnO2 with nano-crystal size ∼15 Å) as terminal electron acceptor fueled simultaneous ammonium oxidation (up to ∼400 µM of ammonium removed) and production of Mn(II) with a ratio ∆[Mn(II)]/∆[NH4+] of 1.8, which is very close to the stoichiometric value of manganammox (1.5). Additional incubations spiked with external ammonium also showed concomitant ammonium oxidation and Mn(II) production, accounting for ∼30 % of the oxidized ammonium. Tracer analysis revealed that the nitrogen loss associated with manganammox was 4.2 ± 0.4 µg 30N2/g-day, which is 17-fold higher than that related to the feammox process (anaerobic ammonium oxidation linked to Fe(III) reduction, 0.24 ± 0.02 µg 30N2/g-day). Taxonomic characterization based on 16S rRNA gene sequencing revealed the existence of several clades belonging to Desulfobacterota as potential microorganisms catalyzing the manganammox process. These findings suggest that manganammox has the potential to be an additional Nr sink in coastal environments, whose contribution to total Nr losses remains to be evaluated.

Contribution of different land use catchments on the microplastic pollution in detention basin sediments.

The assessment of microplastic (MP) pollution in urban areas is essential considering its abundance in freshwater, particularly due to urban wet weather discharge. The precise sources of MPs must be identified to better understand its characteristics. This study examines the relationship between MP pollution in detention basin sediments and land use in the investigated catchments. The study of stormwater management infrastructure, mainly in detention basins, has enabled the quantification of MP abundance in sediments conveyed by stormwater in urban areas. Sediment sampling was conducted in ten detention basins and one combined sewer overflow (CSO) structure in the Lyon metropolitan area, France. These basins correspond to stormwater outlets of representative urban catchment areas. MP extraction involves densimetric separation and organic matter degradation. MPs were then characterized using micro-Fourier infrared spectroscopy and siMPle software. This protocol identified MPs between 50 and 500 µm in the study sites. This study highlights the high abundance in the collected sediment samples, ranging from 2,525 to 1,218,82 MP kg-1 by dry weight sediment. The MPs found have a median size around 115 µm, making them very small MPs that are mainly composed of polypropylene followed by polyethylene and polystyrene or polyethylene terephthalate. The abundance of MPs in sediments is associated with the land use type. Catchments in predominantly industrial and commercial zones were more significantly polluted with MPs compared with those in predominantly agricultural or heterogeneous zones. Finally, statistical analyses revealed links between sedimentary and urban parameters and MPs concentrations. Several recommendations are given for future research, notably concerning the analyzing of stormwater sediments to understand the sources of MP pollution.

Potentially Toxic Elements' Accumulation in Relation to Sediment Physicochemical Attributes and Microplastic Content in Zayandeh-Rood River, Iran.

Microplastics (MPs) are an emerging pollutant whose ability to adsorb potentially toxic elements (PTEs) poses a serious threat to aquatic ecosystems, including rivers. In highly developed basins, the abundance of MPs in river sediment is expected to be high, elevating the sedimentary accumulation of PTEs. This hypothesis was tested in the Zayandeh-Rood River, Central Iran, with 21 sediment sampling stations distributed along the entire river stretch. Results of sediment analysis showed significant variations in the abundance and size of MPs, with concentrations ranked as Ba (270.71 mg/kg) > Li (21.29 mg/kg) > Cs (2.50 mg/kg) > Be (1.44 mg/kg) > Sn (1.17 mg/kg) > Mo (1.06 mg/kg) > Ag (0.76 mg/kg), along with sediment physicochemical attributes such as EC, TOC, pH and grain size. MPs were identified in all sediment samples with a mean of 588 items/kg dry weight. Except for Ag, all other PTEs were classified as uncontaminated but exhibited increased enrichment downstream. According to the results of the generalized additive model (maximum R-sq of 0.766), the sedimentary concentration of the majority of PTEs is nonlinearly and positively associated with smaller and more abundant MPs. This study acknowledges that MPs might influence sediment porosity, permeability and structure, thereby directly affecting the settling dynamics of other particles, especially PTEs.